Often we encounter a very common problem the failure of the remote control

This is not just about air conditioning, after all today we have a multitude of electronic devices that use remote control. But in today’s article, we’ll help you know what to do when the air conditioning remote control starts to fail. In order to know more about the Air conditioning repairs Geelong, you must always seek help from the various official web portals.

What to do when control starts to fail?

Firstly, you should check if the batteries are dead. On the recommendation of all manufacturers, use alkaline batteries as they have a longer life and efficiency than ordinary batteries. To take a quick test and find out if the remote is working, for that you must do the following. Get a digital camera (it can be a camcorder, camera or smartphone, as long as it is digital), point to the sensor on the remote control. Press any button on the control. If it is working, you can see through the camera screen a light coming out of the sensor each time a key on the control is pressed. If you have seen the light on the control and still it is not working, it means that your device has a problem with the receiver. On the other hand, if you cannot see the light coming out of the sensor, it indicates that your control is in trouble. When this occurs, we must “reset” the signal. For this follow the following steps.

  • Locate the “reset” button on the remote control
  • Press the button with a pointed object for at least 3 seconds
  • Remove the batteries for 10 seconds and reinsert them.
  • If your control still has problems, go to the next step.

How do I change the air conditioning control?

To perform a repair on the internal card of the remote control, on the sensor of the device or to replace it with a new control, you must call a professional who is authorized to mark your device. Thus, in case you have complications with the repair, you can request a new warranty repair. Another way, which does not require third party participation, is the request that you can make to the manufacturer yourself. Generally, there are customer service channels, such as SAC, and this number can be found easily on the manufacturer’s own website. Now, if your device is already older and out of warranty, purchases a universal remote control (exclusive for use on air conditioners). This accessory can be found at any store in your city that sells air conditioner parts and accessories. However, it is necessary to know the make and model of your device.

And while the remote control is not coming, how do I use it?

In most cases, split appliances have a button on the front to turn on and off, as well as televisions. On some specific models, you can also find the temperature control knobs. If you do not have it, when you turn it on by the front button of the device, your device will operate in the automatic mode, keeping the ambient temperature between 22 and 24ยบ C.

But running out of control is not recommended. The tips here only serve you while you wait for the remote control order to arrive, because in most cases the accessory is not available and therefore needs to come from the factory (which is hardly in the same city).

Comments are closed.

  • Partner links